Blackmagic Design Videohub Master Control Pro Installations- Und Bedienungsanleitung Seite 23

Labeling Pushbuttons
Videohub Master Control Pro and Videohub Smart Control Pro have removable pushbuttons
that provide access for labeling.
Included with the software installer is a Videohub Control Labels folder containing a
PDF template file. Fill out and print the PDF file labels. Then cut out the square labels so they
are ready to be inserted into the buttons.
To remove the buttons:
1
Place your Videohub control panel on a desk
or workbench.
3
Loosely place your new printed label into the
upturned clear keycap.
2
The button keycaps can be easily removed by
inserting your fingernail between the keycap
and the button.
4
Replace the keycap by aligning it onto the
button and gently push until you feel it click
into place.
Labeling Pushbuttons 23