Blackmagic Design Videohub Master Control Pro Installations- Und Bedienungsanleitung Seite 15
Steuerpanel
Vorschau ausblenden
Andere Handbücher für Videohub Master Control Pro:
- Installations- und bedienungsanleitung (834 Seiten) ,
- Installations- und bedienungsanleitung (364 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Blackmagic Videohub Setup
When Blackmagic Videohub is installed on your computer, a setup utility called Videohub
Setup will also be installed. This setup utility lets you configure your Videohub Master Control
Pro or Videohub Smart Control Pro. Smart Control Pro needs to have buttons configured
before you can control your Videohub.
TIP
Videohub Master Control Pro and Videohub Smart Control Pro models are
configured using Videohub Setup. If you are using a legacy panel, you can set up
your panel using Videohub Hardware Panel Setup. For more information refer to the
'Videohub Hardware Panel Setup' section later in this manual.
To use Blackmagic Videohub Setup:
1
Connect your Videohub Master Control Pro or Videohub Smart Control Pro to your
computer via USB.
Connect your computer via the USB-C port on the rear panel
2
Launch Blackmagic Videohub Setup. Your Videohub control panel will be named in the
utility home page.
3
Click on the circular 'setup' icon or the image of your Videohub control panel to open
the settings.
Blackmagic Videohub Setup
15
Werbung
