Parameters - ECOLAB LMIT09 DPV1 Betriebsanleitung

Unit Number (entry of an 8-digit, individual unit number)
4
8 5
Fig. 24: Basic Settings - Unit Number
1. Call the main menu (item A) and open Basic Settings (item B)
(see Ä 8.4 'Main menu' on page 46).
ð The Basic Settings menu is displayed.
2.
Press the 'Enter'
ð This selects the Language submenu.
3.
Press the 'Down'
ð This selects the Unit Number submenu (item C).
4.
Press the 'Enter'
ð The display now shows the unit number with the first digit highlighted in grey
(item 4).
5.
Use the
6. Then press the 'Right'
or
7.
You can use the
ð All settings are saved and the display returns to Basic settings menu (see
Ä 8.5 'Basic settings' on page 49).
8.6

Parameters

NOTICE!
For space reasons, some of the menu items are displayed on several
pages in the graphics display.
The
to move between the individual menu items.
Calling Parameters
Call the Main Menu see:
Press the 'Down'
the 'Enter'
Temperature menu item is shown with a grey background (inverted) when
you access the menu.
A
1
C
6 7
button (item 1).
arrow button twice (item 9).
button (item 3).
(item 5) or (item 6) button to change the first digit.
arrow button (item 7) to go to the next digit and use the
buttons again to adjust this digit. Repeat this process up to the final digit.
button (item 10) to confirm the set values at any time.
and/or buttons or
Ä Chapter 8.4 'Main menu' on page 46
button to select the Parameters menu item. Press
button to call the Parameters submenu (item P). The
B
2
and/or
61
Operation
3
buttons can be used
417101561 Rev. 4-06.2021