ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 161

Operation
Changing basic settings
9 6
Fig. 12: Changing basic settings
1. Call the main menu by pressing the left button (for approx. 4–5 seconds).
(See also
2. The upper menu level Basic settings (item 2) is displayed in inverted form and
is available for selection.
3.
Press (item 3).
ð The display switches to the Basic settings and hows the Language
selection in inverted form.
4.
Press the 'Down'
ð The inverted selection within the menu moves to Date/Time.
5. Press the 'Down'
ð The inversion within the menu moves to Access Code.
On the right, the first number of the 4-digit code is displayed in inverted form.
6. Use the 'Up'
7.
Then press the 'Right'
set.
8.
Press the 'Enter'
ð If the code entered is correct, the display returns to the original display of the
Basic Settings and the areas that were previously blocked ( ) are now
accessible.
Making changes to the parameters/calibration
Fig. 13: Changing parameters/calibration
417101561 Rev. 4-06.2021
2
3
7 8
Ä 8.4 'Main menu' on page 46)
button (item 4).
button (item 5).
(item 6) or 'Down'
arrow button (item 8) to switch to the next number to be
button (item 9) to confirm your selection.
2
3
9
4
10
(item 7) arrow buttons to set the number.
4
48
5
8 5 6 7