ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 182

Selecting and setting the table
A
D
2
3
4
3
4
8
Fig. 32: Selecting the table
1. Open the table sampling points (Number Points),
Ä 'Setting the product table' on page 64.
see:
2. Press the 'Right'
table. item 2).
3.
Use the button (item 3) to return to the customer selection.
4.
You can use the 'Down'
different table items (1-10).
5. Use the 'Right'
row, where you can individually adjust each number using the
(item 6).
6.
Then press the 'Right'
or button to adjust the value.
7. Repeat the process until all of the numbers in this row of the table have been
adjusted as required. Once you have reached the last digit in the row, you can press
the 'Right' arrow button to select the next row and adjust all of the numbers in
this row in the same way as for the first row.
B
5
6
5
10
9
13
button three times to access the setting area for the
and 'Up'
arrow button to enter the setting area for the values in the first
arrow button to move to the next point and again use the
69
7
10
11 13 12
buttons (item 4) to switch between the
417101561 Rev. 4-06.2021
Operation
C
1
or buttons