(Import) Parameters
Fig. 61: Service - USB Functions - Import/Export - (Import) Parameters
1.
Select the menu as described in
2.
Press the 'Down'
3.
Press the 'Enter'
Here, both directories and individual files are displayed; you can use the 'Up
arrow button or the 'Down'
button to select them.
The selected file is imported into the LMIT 09 / S209, and the parameters are reset as a
result. Use the ESC button to exit this screen again and return to the USB Functions -
Import/Export menu.
Ä 8.8 'Service' on page 83.
button twice to select the (Import) Parameters screen.
button to display the parameter data on the USB memory stick.
arrow button to highlight them and the 'Enter'
93
Operation
417101561 Rev. 4-06.2021