Operation
Manual Functions - System Info
7
Fig. 62: Service - System Info
1.
Select the menu as described in
2.
When you access the Service menu, the Manual Functions menu item is
highlighted with a grey background (inverted). Press the 'Down'
to select the System Info option.
3.
Press the 'Enter'
The software version and the currently saved calibration and alarm log data are
displayed here.
4.
Use the ESC button (item 7) to exit this screen again and return to the System info
menu.
Table:
1:
Software version assembly 289251, EBS no. on request, display
2:
Software version assembly 289250, EBS no. on request, measuring amplifier
3, 4:
START: Time at which the log memory was reset
5, 6:
Number of incidents which have occurred
7, 8:
Size of the log memory
417101561 Rev. 4-06.2021
1
4
Ä 'Selecting Service' on page 83.
button (item 6) to access the System Info screen.
94
2
5
3
6
button five times