Service - ECOLAB LMIT09 DPV1 Betriebsanleitung

8.8

Service

Fig. 46: Overview – Menu: Service
A Main menu
The following menu items can be accessed:
Ä 'Manual functions' on page 84
n
Simulation of the current outputs and the relay.
Ä 'Calling Manual Functions - Factory defaults' on page 85
n
Resets the device to the factory settings.
Ä 'Manual Functions - Calibration Log' on page 89
n
Displays the calibrations that have been performed.
Ä 'Alarm log' on page 90
n
Displays the saved alarms.
Ä 'Import/Export' on page 92
n
Saves the settings, alarm log, calibration logbook and customer products to a USB
storage device.
Ä 'Manual Functions - System Info' on page 94
n
Displays the version number, the number of saved alarms and the number of
calibrations performed.
Selecting Service
Fig. 47: Selection: Service menu
1. Call the Main Menu see:
Press the 'Enter'
2.
Press the 'Down'
ð The Service submenu is displayed in grey (inverted).
3.
Select Service with the 'Enter'
ð The Service submenu is called and Manual Functions is shown with a grey
background (inverted).
4.
Use the 'Down'
setting from the menu.
A
1
Ä 8.4 'Main menu' on page 46
button to call up the Basic Settings submenu.
button (item 1) three times.
(item 3) and 'Up'
B Menu selection Service
2 3
button (item 2).
buttons (item 4) to select the required
83
Operation
B
B
4
417101561 Rev. 4-06.2021