ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 160

Display screen with active access block
Display screen with deactivated access block
Cancelling the access block
1. If an access block has been set up as described in
must be removed in order to access all menu items.
2. To access the main menu, call it up as described in
on page 46. Depending on the particular scenario, there are two different ways to
remove the access block (see
If the access block is enabled, then a closed padlock icon
next to areas that are blocked when the main menu is called (see
Ä Chapter 8.4 'Main menu' on page 46).
These areas cannot be accessed until the block has been removed
Ä 'Access block' on page 46).
(see
If the access block has been removed as described in
block' on page 46, the areas that were previously blocked and shown
with a closed padlock icon
icon instead. To completely remove the block, enter the access
code successfully and proceed as described in
(entry of a 4-digit access code)' on page 53. From this point on,
neither of the padlock icons is displayed any more.
Ä on page 47 and Ä on page 47).
47
Operation
Ä 'Access
are then shown with an open padlock
Ä 'Access Code
Ä 'Access block' on page 46, it
Ä Chapter 8.4 'Main menu'
417101561 Rev. 4-06.2021
is shown