Device Ident Number; Warranty Scope; Contact - ECOLAB LMIT09 DPV1 Betriebsanleitung

General
1.7

Device ident number

The ident number is used to identify the unit manufacturer and the unit type.
The PROFIBUS user organisation (PNO) has assigned the following ident number for the
conductivity and temperature transmitter LMIT09 DP/V1: 0588H.
Unit master data:
The unit master data can be obtained from the manufacturer and the PNO under
the file name Ecol0588.gsd. This file is also provided on the documentation CD
(article no. 417101559) included in the scope of the equipment.
1.8

Warranty scope

A warranty for operational safety, reliability and performance under the following
conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists
n LMIT09 DPV1 is used in accordance with the explanations in these operating
instructions.
n Only original spare parts are used for repairs.
n Only the approved Ecolab products are used.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to
the product. The manufacturer's warranty conditions apply.
1.9

Contact

Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
417101561 Rev. 4-06.2021
Before contacting the manufacturer,
we always recommend contacting your
distributor first.
10