Alarm Log - ECOLAB LMIT09 DPV1 Betriebsanleitung

Operation

Alarm log

All of the alarm messages which occur in the unit are logged and saved with a date/time
stamp and information about the type of alarm. The saved entries can be called up in this
menu.
The log is structured as a ring, so the last entry is overwritten if the memory space is full.
Fig. 55: Service – Alarm Log
1. Select the menu (
ð Service is called and Manual Functions (item 1) is shown with a grey
background (inverted).
2.
Press the 'Down'
ð The Alarm Log submenu (item 3) is displayed in grey (inverted).
3.
Press the 'Enter'
ð An overview of saved error messages is displayed.
4.
You can use the 'Down'
(items 6 to 7).
5. To leave the menu, press the ESC button (item 8).
Parameters
This is used to save all settings on a language-specific basis, with formatted text.
Fig. 56: Service – USB Functions – Parameters
1. Select the menu as described in
ð USB functions is called and Parameters (item 1) is shown with a grey
background (inverted).
2.
Press the 'Enter'
3).
ð The parameter data is then written to the USB memory stick.
In the process, a directory is created on the memory stick, and both the name of
the directory and the name of the generated file are shown on the display.
3. Use the ESC button (item 4) to exit this screen again and return to the USB
Functions menu.
417101561 Rev. 4-06.2021
1
2
Ä 8.8 'Service' on page 83).
button (item 2) three times.
button (item 4) to call the Alarm Log submenu (item 3).
button (item 5) to scroll through the displayed messages
1
2
Ä 8.8 'Service' on page 83.
button (item 2) to call the USB-Flash Drive submenu (item
3
4
3
4
90
6
7
8 5