ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 172

Reference Temperature (0°C, 20°C, 25°C or manual entry)
The reference temperature is adjusted under this menu item.
This is the reference temperature to which the medium is to be
temperature-compensated. Whenever the reference temperature is
changed, all set temperature coefficients are converted to the new
reference temperature (a corresponding message is shown on the display
when you exit the Basic Settings screen).
A
C
4
5
8
Fig. 22: Basic Settings - Reference Temperature
1. Call the main menu (item A) and open Basic Settings (item B)
Ä 8.4 'Main menu' on page 46).
(see
ð The Basic Settings menu is displayed.
2. Press the 'Enter'
ð This selects the Language submenu.
3. Press the 'Down'
ð This selects the Reference Temperature submenu (item C).
4. Press the 'Enter'
ð The Reference Temperature submenu opens.
The display shows the configuration range with the selection for 0° C (item 4)
highlighted in grey.
5. To select 20° C (item 6), 25° C (item 7) or man. (item 8), use the 'Down'
button (item 5).
6. Under the option man., you can freely choose the required temperature. Use the
'Right' button to access the setting.
7. Then, use the 'Up'
Setting range: 0 to 55 °C.
8. You can use the
ð All settings are saved and the display returns to Basic settings menu (see
Ä 8.5 'Basic settings' on page 49).
B
1 2
6
9
10
button (item 1).
arrow button twice (item 7).
button (item 3).
or 'Down' button to adjust the temperature.
button (item 10) to confirm the set values at any time.
59
Operation
3
7
417101561 Rev. 4-06.2021