Packaging - ECOLAB LMIT09 DPV1 Betriebsanleitung

General
Pre-notification of the return
The return must be requested online: https://www.ecolab-
engineering.de/de/kontakt/ruecksendung.html.
Fill in all the details and follow the navigation.
The following documents must be completed:
– Returns form
– Request the form from Ecolab.
– Fill out the form correctly and in full.
– Fill in the clearance declaration.
– Send both in advance by fax to: (+49 8662 61-258)
– System components:
– Free of all impurities (rinsed).
– Must be dispatched in suitable plastic packaging and in a box in
– Cartons:
– For address see:
– The word „REPAIR" must be written on a sticker or in clear
– Include a returns form.
1.4

Packaging

The individual packages are packaged according to the expected transport conditions.
Only environment-friendly materials were used for the packaging. The packaging is
designed to protect the individual components up to assembly against shipping damage,
corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
417101561 Rev. 4-06.2021
order to avoid any leakage of flushing water.
Ä 1.9 'Contact' on page 10
handwriting.
8