Range (Conductivity)
NOTICE!
The assignment of the conductivity current output can be assigned to five
different ranges.
Factory setting: 0...200mS/cm ≙ 4...20mA
Fig. 37: Range (Conductivity)
1.
Select the required set of parameters for the CIP range as described in
Ä 8.6 'Parameters' on page 61.
2.
Select the Range by pressing the 'Down'
3.
Press the 'Right'
the 'Up'
or 'Down'
Setting range: 5 decadic ranges.
4.
Press the
button to confirm your entry and switch back to the Range selection.
arrow button to switch to the selection area, where you can use
button to select the desired range.
75
button twice.
417101561 Rev. 4-06.2021
Operation