ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 173

Operation
Temperature Unit (Celsius or Fahrenheit)
NOTICE!
The selection of Fahrenheit as the temperature unit affects only the
temperature display and the temperature current output.
4
Fig. 23: Basic Settings - Temperature Unit
1. Call the main menu (item A) and open Basic Settings (item B)
Ä 8.4 'Main menu' on page 46).
(see
ð The Basic Settings menu is displayed.
2. Press the 'Enter'
ð This selects the Language submenu.
3. Press the 'Down'
ð This selects the Temperature Unit submenu (item C).
4. Press the 'Enter'
ð The Temperature Unit submenu opens.
The display shows the configuration range with the selection for Celsius (item
4) highlighted in grey.
5. To select Fahrenheit (item 6), use the 'Down'
6. Under the option man., you can freely choose the required temperature. Use the
'Right'
7. Then, use the 'Up'
Setting range: 0 to 55 °C.
8. You can use the
ð All settings are saved and the display returns to Basic settings menu (see
Ä 8.5 'Basic settings' on page 49).
417101561 Rev. 4-06.2021
A
1
C
5
button (item 1).
arrow button twice (item 8).
button (item 3).
button to access the setting.
or 'Down'
button (item 10) to confirm the set values at any time.
B
2
6
7
button (item 5).
button to adjust the temperature.
60
3