ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 183

Operation
8.
Once you have set all rows, you can either confirm all the settings using the
button (item 3), which will take you back to the Parameters – Set Product Table)
menu, or you can use the 'Down'
Table' menu item (item 8). If you press the 'Enter'
appears: 'Are you sure?'.
9. To prevent any unwanted changes, the answer NO is selected by default. You can
exit this menu again by pressing the
the
data, use the 'Right'
and confirm with the
On both cases you will return to first row of the table.
Parameters - Set of Parameters
NOTICE!
If the CIP function is configured (see
the Set of Parameters is displayed with the CIP ranges.
Factory setting: CIP function 'OFF' (only Set of Parameters is displayed).
E
Fig. 33: Overview
417101561 Rev. 4-06.2021
arrow button (item 11) to select YES
button.
A
F
70
arrow button (item 4) to go to the 'Reset
button, a confirmation prompt
button (item 13). If you really want to delete
Ä 8.5 'Basic settings' on page 49),
B
C
G
D