Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Decommissioning, dismantling, environmental protection
Dismantling
DANGER!
Danger of injury in case of improper dismantling!
Dismantling may be carried out only by skilled personnel using PPE.
Stored residual energy, components with sharp edges, points and corners,
on and in the system, or on the required tools can cause injuries.
Carefully rinse all components which come into contact with the product in
order to remove chemical residue.
DANGER!
Contact with live components can be fatal
Before commencing dismantling, ensure that the device has been fully
isolated from the power supply. Activated electrical components can make
uncontrolled movements and lead to serious injury.
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
The procedure for dismantling is as follows:
1.
Make sure you have sufficient space before starting all tasks.
2.
Drain operating fluids and consumables and remove the remaining processing
materials; dispose of them in an environmentally-friendly way.
3.
Then clean assemblies and components correctly, and dismantle them under
observance of prevailing local health and safety and environmental protection
regulations.
4.
Always handle open, sharp-edged components carefully.
5.
Keep the workplace tidy and clean. Loosely stacked components and tools (or
leaving components and tools lying around) can cause accidents.
6.
Depressurise the system and pressure line.
7.
Disassemble the components professionally.
8.
Bear the heavy weight of some components in mind. If required, use lifting gear.
9.
Support the components to avoid them falling or tipping.
NOTICE!
In cases of uncertainty, it is imperative to contact the manufacturer
Ä 'Manufacturer' on page 10.
111
417101561 Rev. 4-06.2021
Werbung
Inhaltsverzeichnis
