ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 132

DANGER!
Risk of fatal injury from electric current!
Electrical hazards are identified by the symbol opposite. Work on those
places may only be carried out by skilled personnel who are duly trained
and authorised.
Contact with live parts represents immediate danger to life due to
electrocution. Damage to the insulation or individual components can be
life-threatening.
– Before starting work, create a de-energised state and ensure this state
is maintained for the duration of the work.
– If the insulation is damaged, switch off the power supply immediately
and arrange for repairs.
– Never bridge or decommission fuses.
– When replacing fuses, comply with the rating.
– Do not expose live parts to moisture as this may cause short-circuits.
Risk of fire
DANGER!
Risk of fire
If there is a risk of fire, it is imperative to use the designated extinguishing
agent and to implement suitable safety measures to tackle the fire.
It is also imperative here to comply with the safety data sheet for the
chemicals you use to tackle the fire!
Risk of slipping
DANGER!
Slipping hazards are marked by the symbol opposite.
Spilled chemicals create a risk of slipping when wet.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused
by leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
19
Safety
417101561 Rev. 4-06.2021