ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 205

Operation
Import/Export
NOTICE!
The import/export of customer products may be performed only by
authorised Ecolab employees.
From this screen, it is possible to both save data from the LMIT09 DPV1 to a USB
memory stick (export), as well as to transfer data from a USB stick to the LMIT09 DPV1
(import).
This function can be used to exchange all of the settings (including product tables)
between the devices. Alarm data and calibration values are excluded.
Fig. 59: Import/Export
1. Select the menu as described in
ð USB functions is called and Parameters (item 1) is shown with a grey
background (inverted).
2.
Press the 'Down'
ð The Import/Export submenu (item 3) is displayed in grey (inverted).
3.
Press the 'Enter'
(Export) Parameters
Fig. 60: Service - USB Functions - Import/Export - (Export) Parameters
1. Select the menu as described in
ð Import/Export is called and Parameters (item 1) is shown with a grey
background (inverted).
2.
Press the 'Enter'
3).
ð The parameter data is written to the USB memory stick. In the process, a
directory is created on the memory stick, and both the name of the directory
and the name of the generated file are shown on the display.
3. Use the ESC button (item 4) to exit this screen again and return to the USB
Functions menu.
Use the ESC button to exit this screen again and return to the USB Functions - Import/
Export menu.
417101561 Rev. 4-06.2021
1
2
Ä 'Import/Export' on page 92.
button (item 2) three times.
button (item 4) to call the Import/Export submenu (item 5).
Ä 'Import/Export' on page 92.
button (item 2) to call the USB-Flash Drive submenu (item
92
3
4
1
2 4
3