ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 166

Access Code (entry of a 4-digit access code)
A
C
4
8 5 6
Fig. 17: Basic Settings - Access Code
NOTICE!
To disable a preset code, you must enter the digit '0' four times when
entering the code. This information is also shown in the text on the display
Ä 'Access Code (entry of a 4-digit access code)' on page 53).
(see
1. Call the main menu (item A) and open Basic Settings (item B)
(see Ä 8.4 'Main menu' on page 46).
ð The Basic Settings menu is displayed.
2.
Press the 'Enter'
ð This selects the Language submenu.
3.
Press the 'Down'
ð This selects the Access Code submenu (item C).
4.
Press the 'Enter'
ð The Access Code submenu opens and the display shows the first number with
a grey background (item 4).
5. Use the buttons:
6.
Press the 'Right'
ð The second number is displayed with a grey background.
7. Use the buttons:
8.
Press the 'Right'
ð The third number is displayed with a grey background.
9. Use the buttons:
10. Press the 'Right'
ð The fourth number is displayed with a grey background.
11. Use the buttons:
12. Use the
button (item 8) to confirm the setting.
ð All settings are saved and the display returns to Basic settings menu (see
Ä 8.5 'Basic settings' on page 49).
B
1 2
7
button (item 1).
arrow button twice (item 2).
button (item 3).
(item 5) or (item 6) to set the number.
arrow button (item 7).
(item 5) or (item 6) to set the number.
arrow button (item 7).
(item 5) or (item 6) to set the number.
arrow button (item 7).
(item 5) or (item 6) to set the number.
53
Operation
3
417101561 Rev. 4-06.2021