IT
PULSANTE BLOCCO ACCESSORIO
IDRAULICO
Precauzioni da osservare se la macchina vi-
ene fornita con il dispositivo di "blocco ac-
cessorio idraulico".
Questo dispositivo a movimento idraulico
ma a comando elettrico permette all'opera-
tore dal posto di guida di bloccare o sbloc-
care un accessorio.
Il dispositivo aziona due perni (X, Y,
che si muovono orizzontalmente sull'attac-
co rapido, verso l'esterno (blocco dell'acces-
sorio) e verso l'interno (sblocco dell'acces-
p
sorio).
Per bloccare l'accessorio i due
perni di blocco devono fuoriusci-
re completamente dai fori de-
ll'attacco rapido (
Descrizione comandi
L'operatore per selezionare il dispositivo
"blocco accessori idraulico" deve
mantenere premuto il pulsante sulla
consolle di comando (1,
3.25).
Il pulsante ha due posizioni:
- premuto in su (1a,
3.25), il "blocco ac-
cessori idraulico" è attivato;
- premuto in giù (1b,
3.25), il "blocco ac-
cessori idraulico" è disattivato.
L'operatore mantenendo premuto il
pulsante (1b,
3.25) può azionare i due
perni (X, Y,
3.24) premendo il pulsante
basculante di comando optional (4,
sul manipolatore sinistro (3,
- verso destra i due perni escono e blocca-
no l'accessorio ;
- verso sinistra i due perni rientrano e
sbloccano l'accessorio .
L'operatore
rilasciando
(1a,
3.25) disattiva il dispositivo di bloc-
co accessori idraulico e ripristina i comandi
standard dell'optional.
Se l'accessorio equipaggiato è provvisto di
raccordi idraulici, collegarli negli innesti
rapidi sul braccio, eseguendo l'operazione
con motore termico spento (
- ACCESSORI ADATTABILI IN OPTIONAL PER
LA GAMMA).
3.24
X
X
HYDRAULIC ACCESSORY BLOCK
BUTTON
Precautions to be taken if the machine is
provided with the "hydraulic accessory
block" device.
This hydraulic device with electric control
makes it possible for the operator to
block/release an accessory from the driving
seat.
3.24)
The devices activates two pins (X, Y,
which move horizontally on the quick-re-
lease coupling, outwards (blocking the ac-
cessory) and inwards (releasing the acces-
t
sory).
To block the accessory, the two
check pins must come completely
out of the quick-release coupling
(
3.25).
Description of the controls
To select the "hydraulic accessory block"
device, the operator must keep pressed the
pushbutton on the switchboard (1,
The pushbutton has two positions:
pressed on (1a,
accessory block" is activated:
pressed down (1b,
accessory block" is deactivated.
By keeping the pushbutton pressed
(1b,
3.25) the operator can activate the
two pins "(X, Y,
nal rocker button (4,
3.25)
nipulator (3,
3.25):
- to the RH, the two pins come out and
block the accessory;
- to the LH, the two pins retract and relea-
se the accessory.
By releasing the pushbutton (1a,
il
pulsante
the operator deactivates the hydraulic ac-
cessories block and restores the standard
optional controls.
If the equipped fitted is provided with hy-
draulic connections, connect these in
the quick-release coupling on the boom,
carrying out the operation
e
Capitolo: 4
with the IC engine switched off (
ter: 4 - OPTIONAL ATTACHMENTS FOR USE
WITH THE RANGE).
Y
Y
EN
3.24)
3.25)
3.25).
3.25), the "hydraulic
3.25), the "hydraulic
3.24) pressing the optio-
3.25) on the LH ma-
3.25):
3.25)
e
Chap-
1a
2
1
1b
2-46
DE
TASTE BLOCKIERUNG HYDRAULIK-
ANBAUGERÄT
Vorsichtsmaßnahmen, die zu beachten
sind, wenn das Fahrzeug mit der Vorrich-
tung "Blockierung Hydraulik-Anbaugerät"
geliefert wird.
Diese Vorrichtung mit Hydraulikbewegun-
gen, aber elektrisch gesteuert, erlaubt dem
Bediener am Fahrerplatz, ein Anbaugerät
zu blockieren oder zu lösen.
Die Vorrichtung aktiviert zwei Zapfen (X,
Y,3.24) , die dich waagerecht an der
Schnellkupplung nach Außen (Blockierung
des Anbaugeräts und nach Innen (Lösen
p
des Anbaugeräts) bewegen.
Um das Anbaugerät zu blockie-
ren, müssen die beiden Blockie-
rungszapfen komplett aus den
Öffnungen der Schnellkupplung
(
3.25) heraustreten.
Beschreibung der Bedienungen
Um die Vorrichtung für die "Blockierung der
Hydraulik-Anbaugeräte" zu wählen, muss
der Bediener die Taste an der Steuerkonsole
(1,
3.25) gedrückt halten.
Die Taste hat zwei Positionen:
- nach oben gedrückt (1a,3.25): die
"Blockierung des Hydraulik-Anbauge-
räts" ist aktiv;
- nach unten gedrückt (1b,3.25): die
"Blockierung des Hydraulik-Anbauge-
räts" ist deaktiviert.
Hält der Bediener die Taste (1b,3.25)
gedrückt, kann er die beiden Zapfen (X,
Y,3.24) aktivieren, indem er die Wiege-
taste für die Ansteuerung der Optionals
(4,3.25) am linken Manipulator (3,3.25)
drückt:
- nach rechts treten die beiden Zapfen
heraus und blockieren das Anbaugerät;
- nach links treten die beiden Zapfen zu-
rück und lösen das Anbaugerät.
Lässt der Bediener die Taste (1a,3.25) los,
deaktiviert er die Vorrichtung für die Blo-
ckierung des Hydraulik-Anbaugeräts und
nimmt die Standard-Bedienungen des Op-
tionals wieder auf.
Wenn das Optional mit Hydraulikanschlüs-
sen ausgestattet ist, diese an den Schnell-
kupplungen am Ausleger anschließen.
Diese Arbeit bei abgestelltem Antriebsmo-
u
tor ausführen (
Kapitel: 4 - IN OPTIONAL
ANPASSUNGSFÄHIGES ANBAUGERÄT FÜR
DIE BAUREIHE).
3.25
4
3