Herunterladen Inhalt Inhalt Diese Seite drucken

Betriebsart Lüften; Statusbereich - Manitou MRT-X 3255 PLUS PRIVILEGE Betriebsanleitung

Inhaltsverzeichnis

Werbung

IT
Riscaldamento on con Longpress
Il riscaldatore viene acceso immediatamen-
te.
Confermare la selezione
La selezione delle opzioni Riscaldamento
o Ventilazione
va sempre confermata
con il tasto
.
Modalità operativa ventilazione
La modalità operativa Ventilazione non è
possibile in tutte le versioni di riscaldatori
(vedi descrizione tecnica del riscaldatore).
Sensore di temperatura
Nei riscaldatori ad aria, il sensore di tempe-
ratura installato nel riscaldatore e previsto
per la regolazione viene usato anche per
rilevare la temperatura interna.
Videata iniziale
Barra del menu
Zona di stato
Barra del menu
Simbolo
Funzione
Riscaldamento ON / OFF
Ventilazione ON / OFF
Simbolo
Indicazioni nella zona
di stato
Temperatura nell'ab-
itacolo
Valore nom. tempe-
ratura
Zona di stato
Se non è attivata nessuna opzione del menu,
nella zona di stato viene visualizzata la tem-
peratura all'interno dell'abitacolo del veicolo.
Se è attivata un'opzione (RISCALDAMENTO,
VENTILAZIONE), nella zona di sta to dei
riscaldatori ad aria in modalità di fun -
zionamento continuo viene visualizzata la
temperatura dell'abitacolo e il valore nomi -
nale della temperatura alternativamente.
Se al primo avviamento, la modalità di
riscaldamento continuo viene trasformata
in durata di esercizio limitata da parte
dell'officina che esegue il montaggio, oltre
alla temperatura dell'abitacolo e alla tem -
peratura nominale viene visualizzata anche
la durata di esercizio residua.
EN
Heat ing On with Longpress
The heater is switched on immediately.
Confirm selection
Selection of the Heating
menu items must al ways be confirmed
with the
button.
Ventilat ion operat ing mode
Ventilat ion mode is not possible with all
heater types (see the Technical Description
of the heater for details).
Temperat ure sensor
In the case of air hea ters the temperature
sensor installed in the hea ter and which is
provided for control of the hea ter can also
be
used to determine the interior tempera ture.
Start display
Menu bar
Status area
Menu bar
Symbol
Function
Heating On / Off
Ventilation On / Off
Symbol
Display in the status
area
Temperature inside the
vehicle
Temperature setpoint
Stat us area
If no menu item is activa ted, the
temperature
inside
le is displayed in the sta tus area.
If a menu item (HEAT ING, VENTILAT ION) is
activated the following appears in the sta-
tus area the temperature inside the vehicle
and the temperature setpoint are displayed
alternately for air heaters in continuous
operation.
If during the initial commissioning the
installation workshop changed the cont-
inuous heating mode to limited time ope-
ra tion, the remaining operating time is
displayed in addition to the tempera ture
inside the vehicle and the temperature set-
point.
2-77
Heizen Ein mit Longpress
Das Heizgerät wird sofort eingeschaltet.
Auswa hl bestätigen
or Ventilation
Die Auswahl der Menüpunkte Heizen
oder Lüften
bestätigt werden.
Betriebsart Lüften
Die Betriebsart Lüften ist nicht bei allen
Heizgeräte-Ausführungen möglich (siehe
hierzu in der Technischen Beschreibung des
Heizgerätes).
Temperat urfühler
Bei Luftheizgeräten wird der Temperatur-
fühler, der im Heizgerät verbaut und für die
Rege lung vorgesehen ist, auch zur Ermitt-
lung der Innenraumtemperatur verwendet.
Startanzeige
Menüleiste

Statusbereich

Menüleiste
Symbol
Symbol
Statusbereich
Im
Statusbereich
Menüpunkt aktivert ist, die Tempera-
the
vehic-
tur im Fahrzeuginnenraum angezeigt.
Bei einem aktivierten Menüpunkt (HEIZEN,
LÜFTEN) wird im Statusbereich bei Luftheiz-
geräten im Dauerbetrieb wird die Tempera-
tur im Fahrzeuginnenraum und der Tempe-
ratursollwert im Wechsel angezeigt.
Wurde bei der Erstinbetriebnahme durch
die Einbauwerkstatt der Dauerheizbetrieb
in eine zeitbegrenzte Betriebsdauer geän-
dert, wird zusätzlich zur Temperatur
im Fahrzeuginnenraum und dem Tempe-
ratursollwert die Restbetriebsdauer ange-
zeigt.
DE
muss immer mit der Taste
Funktion
Heizen Ein / Aus
Lüften Ein / Aus
Anzeige im Statusbereich
Temperatur im
Fahrzeuginnenraum
Temperatursollwert
wird,
wenn
kein

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mrt 3255 plus privilege

Inhaltsverzeichnis