Stryker ENT Bedienungsanleitung Seite 7

Symbol Name: Definition
Stacking limit by number: To indicate that the items shall not be verti-
cally stacked beyond the specified number, either because of the nature of
the transport packaging or because of the nature of
the items themselves.
2403
Stand-by: To identify the switch position by means of which part of the
equipment is switched on in order to bring it into the stand-by condition,
and to identify the control to shift to or to indicate the state of low power
5009
consumption. Each of different states of power consumption may be indict-
ed using a corresponding colour.
Fuse: To identify fuse boxes or their location.
5016
Earth; ground: To identify an earth (ground) terminal in cases where nei-
ther the symbol 5018 nor 5010 is explicitly required.
5017
Protective earth; protective ground: To identify any terminal that is
intended for connection to an external conductor for protection against elec-
tric shock in case of a fault, or the terminal of a protective earth (ground)
electrode.
5019
Equipotentiality: To identify the terminals that, when connected together,
bring the various parts of an equipment or of a system to the same potential,
not necessarily being the earth (ground) potential, e.g. for local bonding.
5021
Alternating current: To indicate on the rating plate that the equipment is
suitable for alternating current only; to identify relevant terminals.
5032
Electrostatic sensitive devices: To indicate packages containing electro-
static sensitive devices, or to identify a device or a connector that has not
been tested for immunity to electrostatic discharge.
5134
Non-ionizing electromagnetic radiation: To indicate generally elevated,
potentially hazardous, levels of non-ionizing radiation, or to indicate equip-
ment or systems e.g. in the medical electrical area that include RF transmit-
5140
ters or that intentionally apply RF electromagnetic energy for diagnosis or
treatment.
Type BF applied part: To identify a type BF applied part complying with
IEC 60601-1.
5333
Product-Specific Symbols
Symbol Name: Definition
Quantity: Indicates the number of medical devices in the
QTY
packaging.
Note symbol: it is used to supplement or clarify information.
Global Trade Item Number
GTIN
81 FR 38911 FDA Final rule for the use of symbols in labeling
Symbol Name: Definition
Caution: Federal law (USA) restricts this device to sale by
Rx Only
or on the order of a physician.
Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)
Symbol Name: Definition
Indicates that the product must be collected separately and must not be dis-
posed of as unsorted municipal waste.
EN How to Use this Document | 3/34