Stryker ENT Bedienungsanleitung Seite 6

Symbol/ Name: Definition
number
Manufacturer: indicates the medical device manufacturer,
as defined in EU Directives 90/385/EEC, 93/42/EEC and
5.1.1
98/79/EC.
Date of manufacture: Indicates the date when the medical device was
manufactured.
5.1.3
Use-by date: Indicates the date after which the medical device is not to be
used.
5.1.4
Batch code: Indicates the manufacturer's batch code so that the batch or
lot can be identified.
5.1.5
Catalog number: indicates the manufacturer's catalog number so that the
REF
medical device can be identified.
5.1.6
Serial number: Indicates the manufacturer's serial number so that the
SN
medical device can be identified.
5.1.7
Non-Sterile: indicates a medical device that has not been subjected to a
sterilization process.
NON
STERILE
5.2.7
Fragile, handle with care: Indicates a medical device that can be broken
or damaged if not handled carefully.
5.3.1
Keep away from sunlight: Indicates a medical device that needs protec-
tion from light sources.
5.3.2
Keep dry: Indicates a medical device that needs to be protected from mois-
ture.
5.3.4
Temperature limit: Indicates the temperature limits to which the medical
device can be safely exposed.
5.3.7
Humidity limitation: Indicates the range of humidity to which the medi-
cal device can be safely exposed.
5.3.8
Atmospheric pressure limit: Indicates the range of atmospheric pressure
to which the medical device can be safely exposed.
5.3.9
Do not re-use: Indicates a medical device that is intended for one use or for
use on a single patient during a single procedure.
5.4.2
Consult instructions for use: indicates the need for the use to consult the
instructions for use.
5.4.3
Caution: Indicates the need for the user to consult the instructions for use
for important cautionary information such as warnings and precautions
that cannot, for a variety of reasons, be presented on the medical device
5.4.4
itself.
IEC 60417 Graphical symbols for use on equipment
Symbol Name: Definition
This way up: To indicate correct upright position of the transport package.
0623
Stacking limit by mass: To indicate that the items shall not be vertically
stacked beyond the specified number, either because of the nature of the
transport packaging or because of the nature of the items themselves.
0630
EN How to Use this Document | 2/34