Specifications
Input and Outputs (back
of unit)
Note: The device needs a warm-up period of 10 minutes after storage, plus 1 minute
for each 1 °C difference between storage and operating temperature. Do not turn the
device on until after the warm-up time has passed. If the temperature difference is less
than 3 °C, no warm-up period is necessary.
EN
–
USB 3.0 Interfaces: 4x
–
USB 2.0 Interface: 2x
–
USB-C 1x
–
Line in: 1x
–
Line out: 1x
–
Microphone in: 1x
–
Center/Subwoofer Speaker Out: 1x
–
Rear Speaker Out Jack: 1x
–
SDI- Video In: 1x
–
Power Supply: 1x
–
D-Sub Port Onboard: 1x
DB9 In: 1x
–
–
Display Port: 3x
–
DVI-I In: 1x
–
HDMI-Out Onboard: 1x
–
S/PDIF Out: 1x
–
LAN-Port: 1x
–
Keyboard Port: 1x
–
Mouse Port: 1x
–
Equipotential Connection: 1x
Technical Specifications | 26/34