Electromagnetic Compatibility - Stryker ENT Bedienungsanleitung

11. Electromagnetic Compatibility

Medical devices must comply with specific safety precautions regarding electromagnetic
compatibility (EMC).When installing and operating the device, refer to the EMC advice pro-
vided below.
WARNING
– Do not use mobile or other phones or portable radio frequency (RF) equipment in the vi-
cinity of medical devices. Devices emitting electromagnetic radiation may interfere with
operation of the product.
– Portable RF communications equipment (including peripherals such as antenna cables
and external antennas) should be used no closer than 30 cm (12 inches) to any part of
the Hybrid Navigation System, including cables specified by the manufacturer. Other-
wise, degradation of the performance of this equipment could result.
– The use of accessories and cables other than those specified by Stryker can result in
increased emissions or decreased immunity of the system.
– Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that they are operating normally.
– Do not simultaneously touch accessible plug contacts and the patient.
– The emissions characteristics of this equipment make it suitable for use in industrial ar-
eas and hospitals (CISPR 11 class A). If it is used in a residential environment this equip-
ment might not offer adequate protection to radio-frequency communication services.
The user might need to take mitigation measures, such as relocating or re-orienting the
equipment.
Note: Intended Environment - Special healthcare environment
EN Electromagnetic Compatibility | 28/34