Prophete GENIESSER Bedienungsanleitung Seite 160

MAINTENANCE | CARE
(e.g. electronic and paint damage, damage from rust formation on the bearings,
etc.). Instead, clean the E-bike manually with warm water, a E-bike cleaning agent
and a soft sponge.
WARNING!
• Do not use any aggressive cleaning agents, since they may, e.g., attack the paint.
After cleaning, apply commercial E-bike preservation and polishing agents,
especially also to corrosion-susceptible parts.
• In order to prevent rust formation, the E-bike requires care at shorter intervals in
areas with salty air (near the coast) and must be treated with preserving care
agents.
Clean the E-bike at regular intervals (at least once per year), to prevent damage and flash rust. In par-
ticular after rides in the rain and in winter, there may otherwise be rust formation from splashing or
salt-containing water.
STORING THE E-BIKE
If the e-bike will not be used for a longer period of time, the battery should be removed from the e-
bike and cleaned and preserved as described in the chapter Maintenance/Care.
Storage should be in a dry, cool room (approx. 10°C - 15°C) protected from large temperature diffe-
rences and external influences. The battery should be charged to at least 60 %. Check the charge sta-
te at least every 3 months and recharge the battery for at least 2 hours if necessary.
Hanging storage of the e-bike is recommended with regard to the tyre
SPRING CHECK
After an extended period of time without use, perform the items described in the chapter First com-
missioning/inspections before starting a ride in addition to the regular maintenance work. Specifical-
ly check the functions of the brakes, gearshift, lighting, air pressure and tight fit of the screws, nuts
and quick-clamps. If necessary, specifically also regrease the chain.
EN 72