Prophete GENIESSER Bedienungsanleitung Seite 133

1. Stand on the left-hand side of the e-bike.
2. Select the pushing aid with the Minus button
3. While the push assist symbol is displayed, keep the button
push assist. If the button
then stops automatically.
SETTING MODE
Access the setting mode ("Setting") by pressing both the Plus
same time for approx. 2 seconds.
Use the Plus and Minus
139
button.
140
Exit the menu by pressing the Plus
onds or by confirming BACK and EXIT in the menu.
The setting mode allows you to make the following settings:
TRIP RESET
UNIT
BRIGHTNESS
NIGHT MODE
AUTO OFF
MAINTENANCE NOTICE Reset the maintenance notice
SET CLOCK
LANGUAGE
ERROR MEMORY
is released prematurely and the pedals aren't moving, the motor
141
buttons to select the individual menu items and confirm with the
141
and Minus
139
Reset the distance cyclometer
Switch between kilometres (KM) and miles (MILE)
Set the display brightness
Set the display night mode
Automatic shutting down of e-bike when not in use
Set the time
Set the language
History of error messages
in the display field
141
pressed down to activate the
141
and Minus
139
buttons at the same time for approx. 2 sec-
141
DRIVE SYSTEM
.
144
buttons at the
141
EN 45