Prophete GENIESSER Bedienungsanleitung Seite 103

PEDALS
DANGER OF DAMAGE AND ACCIDENTS!
• The pedals must be tightened well at all times since they may otherwise break out of
their threads! Therefore, check both pedals for tight fit before every ride.
WARNING!
• If the pedals are swapped during installation, the threads will suffer damage and may
break out of the pedal arm after a while! - No warranty if this is not observed!
INSTALLING THE PEDALS
1. Screw the right pedal on clockwise (right-hand thread) and the left
pedal counter-clockwise (left-hand thread) (
pedals with a 15-mm open-faced spanner or, if this is to technically
possible, with a 6-mm hexagon socket wrench according to the
torque specifications (see chapter with torque specifications).
HOLDING THE FOLDING PEDALS IN/OUT
DANGER OF ACCIDENT!
• Before every ride, check that the pedals are latched well.
WARNING!
1. Push the slider in.
41
2. Fold the pedals into the desired position
). Tighten the two
40
41
.
42
PEDALS
40
L R
L = Left-hand thread
R = Right-hand thread
42
EN 15