Prophete GENIESSER Bedienungsanleitung Seite 109

of the seat clamp
64
must be countered with a 6 mm hexagonal socket wrench.
2. Adjust the inclination or distance from the saddle to the hand-
lebar.
3. Tighten the nut
64
cation (see chapter torque specifications).
PATENTED SEAT POST
1. Loosen the lower hexagonal screw
mm hexagonal socket wrench.
2. Adjust the inclination of the saddle.
3. Tighten the hexagon screw
to the torque specification (cf. chapter torque specifications).
RETRACTABLE REMOTE SEAT POSTS
With a retractable remote seat post, the seat post can be retrac-
ted and moved out with a lever on the handlebar.
1. Get off the saddle and push the lever
moves out.
2. Press the lever and carefully place your body weight on
68
the saddle. The saddle moves down until you release the le-
ver.
SUSPENSION SEAT POST
A suspension seat post compensates for impacts and irregulari-
ties of the track or the ground and minimises them. This relieves
the spine and discs of the cyclist accordingly.
You can adjust your spring strength individually.
ADJUST THE SUSPENSION
You can set the suspension at the lower screw of the seat post
with a 6 or 8 mm hexagonal socket wrench (
STIFFER DEFLECTION
turn clockwise (+)
. In some models, the counter-screw
again well according to the torque specifi-
/
65 66
/ + again well according
65 66 67
. The seat post
68
69
MORE COMFORTABLE SUSPENSION
Turn counter-clockwise (–)
+ with a 5 or 6
67
).
SADDLE | SEAT POST
65
66
68
69
EN 21
67