LIGHTING • BRAKE
With the additional switch,
As long as the full beam is switched on, the symbol on the
switch lights up blue.
REAR LIGHT WITH BRAKE LIGHT FUNCTION
For the rear light with brake light function, the rear light is equip-
ped with a motion sensor that triggers a stop signal during bra-
king.
BRAKE
DANGER OF ACCIDENT!
• Safe handling of brakes is essential for your safety when cycling. Therefore,
become familiar with the brakes of your E-bike before your first ride.
DANGER
• Check the brakes for function before every ride. Incorrectly set or defectively
repaired brakes may cause reduced brake output or even complete failure of the
brakes.
• The brake performance depends on many factors. It may reduce considerably, e.g.
due to the ground properties (gravel paths, loose chippings, etc.), additional
payload, downhill rides or detriment weather.
Wet ground may cause the brake distance to be approx. 60% longer than on dry
ground. Therefore adjust your cycling behaviour accordingly. Ride more slowly and
with particular care.
• Avoid sudden and strong braking to avoid slipping or blocking of the wheels.
• Have maintenance work and repairs on the brakes performed only by sufficiently
qualified specialists. Incorrectly set or defectively repaired brakes may cause
reduced brake output or even complete failure of the brakes.
• Replace brake components only with genuine parts, since only this can ensure
proper function.
• The brake linings must be free from dirt, grease and oils at all times, since the
brake output may otherwise rapidly reduce or even be lost entirely.
Danger of accident!
EN
28
you can switch in the full beam.
93
93