SPEED LIFTER
The speed lifer will enable you to set the handlebar at the desired height
within seconds or to practically turn it in by 90° for transport and sto-
rage.
SETTING THE HEIGHT
1. Release the lever
2. Push the handlebar to the desired height.
3. Push the quick-clamp lever
also chapter Quick-clamp).
TURN IN THE HANDLEBAR
1. Release the lever
2. Push the safety lever up
3. Now turn in the handlebar.
If you want to align the handlebar with the riding position again, proceed
as follows:
1. Turn in the handlebar in the cycling direction.
2. Push the safety lever
3. Push the quick-clamp lever
also chapter Quick-clamp).
of the quick-clamp.
60
back until it is completely flush (s.
60
of the quick-clamp.
60
.
61
down completely.
61
back until it is completely flush (s.
60
HANDLEBAR
60
61
EN 19