DRIVE SYSTEM
SWITCH THE DRIVE SYSTEM ON/OFF
1. Insert the battery into the e-bike (see Battery chapter).
2. To wake the battery from sleep mode, press the button on the battery as needed.
3. Hold down the
140
OPERATE THE DRIVE SYSTEM
The drive system assists you whilst pedalling with additional motor power up to a speed of 25 km/h.
You can freely choose between the assistance levels
1. Select the desired assistance level with the Plus
ing.
The higher the selected assistance level, the greater the motor assistance. The speed to be reached
depends to a large extent on various factors, such as:
- total weight (including rider and luggage),
- tyre pressure,
- gradient or incline,
- condition of the ground,
- wind conditions.
For systems with mid-mounted motor, the maximum assisted speed also depends on the gear en-
gaged. The higher the engaged gear, the higher the assisted speed by the mid-mounted motor.
If you stop pedalling whilst riding, the motor switches off automatically after a short delay.
You can ride the e-bike like a normal bicycle with the drive system switched off or with assistance
level at "0".
DRIVING BEHAVIOUR WITH MOTOR ASSISTANCE
The driving behaviour of an e-bike with active motor assistance is sometimes very different from that
of a bicycle.
You should therefore adapt the assistance level of the motor to the outside environment (e.g. road
surface, traffic density, surface conditions), the speed and your own capabilities. For example, use ei-
ther a low level of assistance or no assistance at all when driving into tight bends or when driving at
a slow speed.
PUSHING AID
With the pushing aid you can accelerate the e-bike up to a speed of no more than 6 km/h without any
pedal movement.
EN
44
button of the control unit for a duration of approx. 2-3 seconds.
at any time:
144
or Minus button
139
141
before or whilst driv-