Prophete GENIESSER Bedienungsanleitung Seite 137

USB CHARGING SOCKET
DANGER OF DAMAGE!
• Do not use the USB charging socket when it is wet or while it is raining or snowing,
as this may damage the connected device or e-bike. In this case, the USB port must
WARNING!
be completely closed with the protective cap.
• Be sure to read the operating instructions of the device you want to connect to the
USB charging socket. In this way you avoid operating errors (e.g. when connecting),
which may also lead to damage.
• Only use standard-compliant USB cables and cable/adapter combinations, as other-
wise the connected device or the USB charging socket may be damaged. Plugging in
the USB cable may also not be possible otherwise.
• Do not apply excessive force to the USB connector or when disconnecting the USB
cable. When plugging in, check that the USB plug is pointing in the right direction
and that it is not reversed or bent. Make sure it is fully inserted.
• Do not insert any foreign objects into the USB charging socket.
With the USB charging socket
USB (e.g. smartphones). The battery of the e-bike must be inserted and sufficiently charged for this
purpose.
SWITCH ON THE USB CHARGING SOCKET
1. Switch on the drive system (see Switch the drive system on/off chapter).
2. Open the protective cap of the USB charging socket
ternal device with a USB C cable.
you can operate or charge most devices that can be powered over
154
on the LCD display and connect the ex-
154
DRIVE SYSTEM
EN 49