Prophete GENIESSER Bedienungsanleitung Seite 125

surface, traffic density, surface conditions), the speed and your own capabilities. For example, use ei-
ther a low level of assistance or no assistance at all when driving into tight bends or when driving at
a slow speed.
PUSHING AID
With the pushing aid you can accelerate the e-bike up to a speed of no more than 6 km/h without any
pedal movement.
1. Stand on the left-hand side of the e-bike.
2. Select the pushing aid with the Minus button
3. While the push assist symbol is displayed, keep the button
push assist.. If the button
then stops automatically.
SETTING MODE
Access the setting mode ("Setting") by pressing both the Plus
same time for approx. 2 seconds.
Use the Plus and Minus
111
button.
113
Exit the menu by pressing the Plus
onds or by confirming BACK and EXIT in the menu.
The setting mode allows you to make the following settings:
TRIP RESET
UNIT
BRIGHTNESS
NIGHT MODE
AUTO OFF
LIGHT ALWAYS ON
COMING HOME
MAINTENANCE NOTICE
SET CLOCK
LANGUAGE
ERROR MEMORY
is released prematurely and the pedals aren't moving, the motor
110
buttons to select the individual menu items and confirm with the
110
and Minus
111 110
Reset the distance cyclometer
Switch between kilometres (KM) and miles (MILE)
Set the display brightness
Set the display night mode
Automatic shutting down of e-bike when not in use
Continuous light
Switch-off time for the lighting after the system is switched off
Reset the maintenance notice
Set the time
Set the language
History of error messages
in the display field
110 121
pressed down to activate the
110
and Minus
111
buttons at the same time for approx. 2 sec-
DRIVE SYSTEM
.
buttons at the
110
EN 37