Bosch Performance Line SX Drive Unit Originalbetriebsanleitung Seite 570

Displaying/adjusting basic settings
Note: The settings menu cannot be called up while riding.
To get to the basic settings menu, press the
on the operating unit repeatedly until <Settings> appears in
the text display.
Switching/Leaving Basic Settings
Press the or button repeatedly until the
required basic setting is displayed.
Press the select button repeatedly until the
required basic setting is displayed.
Note: The changed setting is automatically saved upon leav-
ing the respective basic setting.
Changing Basic Settings
To scroll down, briefly press the
ton until the required value is displayed.
To scroll down, press the
until the required value is displayed.
Note: Pressing and holding the relevant button switches
automatically to the next value in the basic settings.
You can choose between the following basic settings:
– <Trip reset?>: All data on the journey so far is reset to
zero.
– <Language>: Here you can select a preferred language
from the following options:
English, German, French, Dutch, Italian, Spanish, Por-
tuguese, Danish, Swedish, Norwegian, Polish, Czech, Ja-
panese, Traditional Chinese for Taiwan, Korean.
– <Units>: Displays the speed and distance in either kilo-
metres or miles.
– <Time>: You can set the time here.
– <Time format>: Displays the time in 12-hour or 24-hour
format.
– <Shift recom.>: You can switch on/off the display of gear
change recommendations.
– <Backlight.>: You can set the duration of the back-
ground lighting here.
– <Brightness>: The brightness can be adjusted to various
levels.
– <Reset settings?>: You can reset the settings by press-
ing and holding the select button here.
– <Back>: You can leave the settings menu with this func-
tion.
Leaving the Basic Settings Menu
You leave the basic settings menu automatically if you are in-
active for 60 s or start riding the eBike, or by using the
<Back> function.
Bosch eBike Systems
select button
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurised water.
Keep the display of your on-board computer clean.
Clean your on-board computer using a soft cloth dampened
only with water. Do not use cleaning products of any kind.
Note: The Intuvia 100 on-board computer may fog up under
certain temperature and humidity conditions. This is not an
select but-
error. Put the on-board computer in a heated room and leave
it to dry.
Have your eBike checked by an expert at least once a year
(including mechanical parts, up-to-dateness of system soft-
select button > 1 s ware).
In addition, the bicycle dealer may enter the service date
based on the distance travelled and/or on a period of time.
In this case, the on-board computer displays a message
telling you when the service date is due each time it is
switched on.
Please have your eBike serviced and repaired by an author-
ised bicycle dealer.
Have all repairs performed only by an authorised bike
u
dealer.
Note: If you are handing in your eBike to a bicycle dealer for
maintenance, it is recommended that you temporarily deac-
tivate <Lock & Alarm>.
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Transport
If you transport your eBike attached to the outside of
u
your car, e.g. on a bike rack, remove the on-board
computer and the eBike battery (exception: built-in
eBike battery) to avoid damaging them.
Briefly press the select button to leave the
basic settings menu using the <Back> function.
Press the select button > 1 s to leave the ba-
sic settings menu using the <Back> function.
Further information on the eBike components
and their functions can be found in the Bosch
eBike Help Center.
0 275 007 3BI | (23.02.2024)
English – 5