English – 4
– <Information>
You can find the following menu items here:
▪ <Contact>
You can find contact details for Bosch eBike Systems
here.
▪ <Certificates>
You can find certificates and eLabels here.
Leaving the Settings Menu
Press the
button to save the settings and
leave the settings menu.
Press and hold the
than one second to leave the settings menu
without saving the settings.
Press the
button to save the settings and
leave the settings menu.
Press and hold the
second to leave the settings menu without sav-
ing the settings.
Quick Menu
Selected settings are displayed on the quick menu. These
settings can also be changed while riding.
You can access the quick menu by pressing and holding
(> 1 s) the select button .
It cannot be accessed from the status page.
The following settings can be changed via the quick menu:
– <Ride>
All data on the journey so far is reset to zero.
– <eShift> (optional)
The settings vary depending on the gearing in question.
For example, you can set your cadence here, provided
that the gearing supports this function.
– <Navigation>
You can select your recent destinations as a new destina-
tion and/or end the running navigation.
Note: Other functions may be available depending on your
eBike equipment.
Start page
If you did not select another page before the last time you
switched off, you will be shown this page when you switch
on the eBike.
0 275 007 3BK | (26.04.2024)
80%
SPEED
or
button for more
button for more than one
a
b
c
i
j
k
l
m
n
The indicators a to c form the statusbar and are shown on
every page.
The navigation bar n briefly indicates which page you are on.
You can access additional pages from the start page. The
statistical data, eBike battery range and average values are
displayed on these pages.
If you are on a different page to the start page when the
eBike is switched off, the most recently displayed page will
appear again when the eBike is switched on.
<Display configuration>
<Display configuration> can be found in the eBike Flow
app under <Settings> → <My eBike>. The eBike must be
switched on and the smartphone must be connected.
The on-board computer display can be customised via <Dis-
play configuration>:
– Change the order of individual screens
eMTB
km/h
22
.7
eBike battery state of charge (can be configured)
Note: For eBikes with assistance up to 45 km/h, the
speed is always shown here.
Riding mode
Bicycle lights
Unit of speed indicator
Indicator name
Your performance
Speed
Drive power
Navigation bar
Press the
button or
button to scroll
through the pages.
Briefly press the select button
through the pages.
a
b
c
i
j
k
l
m
n
to scroll
Bosch eBike Systems