Key Switch (Not Included In The Basic Model) - Kubota Z400-B Handbuch

OW9F'W7
PREHEAT
PRE·CHAUFFAGE
VORWAAME"
U314F()J6
03UFOl 7
0314F0l8
OFF
ARRET ON
AUS MARCHE
:=~'i:~'i..TUFFAGE
0
EIN
VORWARMEN ® START
OEMARRAGE
~"CA'''"
OFF
ARRET ON
AUS MARCHE
PREHEAT
0
EIN
PRE·CHAUFAGE ®START
VORWARMEN OEMARRAGE
AN LASSEN
4) Key Switch (not included in the basic model)
The key switch has 4 positions. The terminal "BAT" is con­
nected to the battery.
The key released at the "PREHEAT" position returns to the
"OFF" position. And it released at the "START" position
returns to the "ON" position.
• PREHEAT
While the key switch is turned and held at the "PREHEAT"
position, the current is supplied to the glow plugs through
the glow plug indicator.
(1) Glow Plug Indicator
(2) To Glow Plugs
(3) From Battery
(4) To Regulator
(5) To Oil Pressure Lamp and Accessory
• START
When the key is turned to the "START" position, through
the "ON" position the current is supplied to the starter.
(1) To Starter
(2) To Glow Plug
(3) From Battery
(4) To Regulator
(5) To Oil Pressure Lamp and accessory
• ON
Only the terminal "AC" is connected to the battery.
At any position of the key except the "OF Fn position, the
terminal nAC" is connected to the "BAT" terminal.
(1) F rom Battery
(2) To Regulator
(3) To Oil Pressure Lamp and accessory
M-55