Lubricating System; Oil Pumpe; M-Ll - Kubota Z400-B Handbuch

LUBRICATING SYSTEM
(E)
(F)
OJl)YF024
-he lubricating system consists of an oil strainer, an oil pump,
a relief valve, an oil filter cartridge and an oil pressure switch.
The oil pump sucks the lubricating oil in the oil pan through
the strainer and sends it to the oil filter cartridge, where the
oil is further filtered.
The filtered oil is forced to the crankshaft, the connecting
rods, the idle gear, the camshaft and the rocker arm shaft
through the oil passage in the cylinder block and the shafts
to lublicate the bearings.
Some oil, splashed by the crankshaft or thrown off from the
bearings, lubricates other engine parts: the pistons, the
cylinder walls, the piston pins, the tappets, the push rods, the
timing gears, and the inlet and exhaust valves.
[A] Piston
[B] Oil Pump
[C] Rocker Arm and Rocker Arm Shaft
[0] Oil Strainer
[E] Camshaft
[F] Oil Filter Cartridge and Relief Valve
M·ll