Valve Seat Tightness
1. Set the nozzle to a nozzle tester.
2. Raise the fuel pressure and keep at 12.75 MPa (130 kgfl
cm
2
,
1849 psi) for 10 seconds.
3. If any fuel leak is found, replace the nozzle piece.
Factory
No fuel leak at 12.75 MPa
specification
{130 kgf/cm'. 1849 psi)
Spraying Pattern
1. Set the nozzle to a nozzle tester and check the nozzle
spraying pattern.
2. If the nozzle does not spray in a good pattern, replace the
nozzle piece.
x
S·125