Kubota Z400-B Handbuch Seite 127

Cmy!''!).]::?
[91 SPECIAL TOOLS
C()Slii'IX}8
\
C():j(iPIIIJ9
1iI1i7Fllii
Checking Fuel Injection Pressure
1. Set the injection nozzle to the nozzle tester.
2. Measure the injection pressure.
3. If the measurement is not within the factory specifica·
tions adjust with the adjusting washer inside the nozzle
holder.
Fuel injection
pressure
Factory spec.
13.73 to 14.71 MPa
140 to 150 kgf/cm'
1991 to 2133 psi
Piston Ring Compressor
Code No.: 07909·32111
Application: Use exclusively for pushing in the piston with
ease.
Piston Ring Tool
Code No.: 07909·32121
Application: Use exclusively for removing or installing
the piston ring with ease.
Flywheel Puller (For vertical type diesel engines)
Code No.: 07916·32011
Application: Use exclusively to take off the flywheel of all
vertical type diesel engines safely and easily.
5-45