A Appendix; Navigation Transmitter Cvs; Navigation Receiver Loconet-Cvs - FLEISCHMANN TRAIN-NAVIGATION6893 Handbuch

A Appendix
A.1

Navigation Transmitter CVs

CV CV
As loco extra
1 116
17 117
18 118
29 129
– 115
8
* The address-parts in CV17 and CV18 (likewise CV117, CV118) will together make up the long address 2000.
A.2

Navigation Receiver LocoNet-CVs

LNCV NameDescription
0 Module
Address
1 Second
Adresse
2 Operation style
Value:
Register Meaning
1 Short address
Long address Highbyte
Long address Lowbyte
only Bit 5
=0: short address valid
=1: long address valid
5 Train category (2 Bit)
8 Manufacturer Identification
First receiver-address (factory setting: 1, parameter
1 - 4095), chapter 7.1, Joker-Address: 65535, chapter 6.3
Second receiver-address (factory setting: 2,
parameter 1 – 4095) , chapter 7.1
Operation style settings
(factory setting, paramter 0 – 10, 20 – 26, 96 – 99)
0 For future use
1 For future use
2 The navigation receiver works with double-sensor in one
location on the layout and has direction recognition,
chapter 8.2
3 The navigation receiver works with 2 single sensors in
2 independent locations on the layout without direction
recognition, chapter 8.2
4 / 20 End location for time-controlled shuttle, chapter 8.3.1
Value: 4 without and value: 20 with block condition reporting
5 / 21 End location for shuttle controlled by another, chapter 8.3.2
Value: 5 without and value: 21 with block condition reporting
6 / 22 Time controlled station stop, chapter 8.3.3
Value: 6 without and value: 22 with block condition reporting
7 / 23 Block system / track manager, chapter 8.3.4, 8.3.5.2
Value: 7 without and value: 23 with block condition reporting
8 / 24 Entry manager, chapter 8.3.5.1
Value: 8 without and value: 24 with block condition reporting
9 / 25 Exit manager, chronological sequence, chapter 8.3.5.3
Value: 9 without and value: 25 with block condition reporting
10 / 26 Exit manager, random sequence, chapter 8.3.5.3
Value: 10 without and value: 26 with block condition reporting
Value Factory
parameter setting
0-127
0/32
(Byte-value)
1- 4
read only
3
199 *
208 *
0
1
155
169