FLEISCHMANN TRAIN-NAVIGATION6893 Handbuch Seite 153

LNCV Name
13 Address of the
entry manager
22-29 Address/Category Addresses or Train categories, which can enter track 1
32-39 Address/Category Addresses or Train categories, which can enter track 2
42-49 Address/Category Addresses or Train categories, which can enter track 3
52-59 Address/Category Addresses or Train categories, which can enter track 4
62-69 Address/Category Addresses or Train categories, which can enter track 5
72-79 Address/Category Addresses or Train categories, which can enter track 6
82-89 Address/Category Addresses or Train categories, which can enter track 7
92-99 Address/Category Addresses or Train categories, which can enter track 8
102-109 Address/Category Addresses or Train categories, which can enter track 9
112-119 Address/Category Addresses or Train categories, which can enter track 10
Just as the entry manager undertakes his search for a vacant destination track for the entry
of a train, the exit manager now behaves in exactly the same way: it firstly tries to bring the
waiting loco into the station using its own individual address. If this cannot happen, then it
sees whether it can be done using the category. If this still not possible, it will then test to
see whether a track has been programmed to accept the common overall track entry.
Electrical accessories and routes in general
With LNCV8 you have the extra possibility to enter a switching command for an electrical
accessory or route. This command will be executed as soon as the sensors are run over, irre-
spective of the vehicle address, which means that all vehicles will switch the same electrical
accessory or route.
LNCV Name
8 Access./route
Example: Exit from a 4-track station
Diagram 21: Exit from a 4-track station
Description
Enter here the address (LNCV0) of the corresponding
entry manager
Description
Address and direction of the second accessory to be
switched, this means that 0 or 1 is added to the address,
similarly the address of a route or feed-back
153