FLEISCHMANN TRAIN-NAVIGATION6893 Handbuch Seite 166

The different types of command have the following priorities:
1. Highest Priority:
2. Medium Priority:
3. Lowest Priority:
A command-group searched through, in ascending order of the LNCVs, each relevant com-
mand found is to be carried out straight away. Commands with a lower priority will only be
carried out as long as no command which carries a higher priority is found. If this happens,
no further additional commands with lower priority are carried out.
Thus: Once a category-command has been found, all of the other category-commands will
be carried out, but no general commands anymore. If a relevant address-command is found,
then all other address-commands will be carried out, but no category-commands or gene-
ral commands anymore.
Example 1: The loco 3 with the train category 1 (address 20001) comes across a sensor. The
following addresses have been programmed in the group for function commands:
LNCV 20
Value 20000 20001
The actions will be executed out as follows:
LNCV20 General Command
LNCV21 Category Command Category agrees: execute, but no more general commands
LNCV22 Address Command
LNCV23 Category Command Do not execute, category command of a lower priority
LNCV24 Address Command
LNCV25 Category Command Category agrees, but priority too low: do not execute
LNCV26 General Command
LNCV27 Address Command
Example 2: The loco 3 with the train category 1 (address 20001) comes across a sensor. The
following addresses have been programmed in the group for speed commands:
LNCV 50
Value 20002 20001
LNCV50 Category Command Do not execute, false category
LNCV51 Category Command Category agrees: execute, but no more general commands
LNCV52 Address Command
LNCV53 General Command
LNCV54 Address Command
LNCV55 Category Command Category agrees, but priority too low: do not execute
LNCV56 Address Command
166
Address-Commands (Addresses 1 – 16382)
Category-Commands (Addresses 20001 – 20004)
General Commands (Addresses 20000)
21 22 23
3 20002
Execution
Address agrees: execute, but no more commands with
lower priority
Do not execute, false address
Do not execute, priority too low
Address agrees: execute
51 52 53
3 20000
Address agrees: execute, but no more commands with
lower priority
Do not execute, priority too low
Do not execute, false address
address agrees: execute
24 25 26
103 20001 20000
54 55 56
103 20001 3
27 28 29
3 0 0
57 58 59
0 0 0