FLEISCHMANN TRAIN-NAVIGATION6893 Handbuch Seite 124

Example:
Sound steam loco series 76 is standing in front of a signal showing red light. After the
signal turning green, the loco should:
• at first switch the steam sound (f1) and the light (f0) on,
• then the loudspeaker message (f8) should be heard,
• after 15 s, the whistle blow of the conductor (f5) should take place,
• after 15 s, the loco then should depart.
Programming of the Module:
LNCV Value
0 1
1
2 7
3 0
4
5 5
6 211
7
8
Now, further programming is necessary in the section of the switching functions:
Function- and Position-programming is:
FUNC LNCV
Adress 20
Function 30
Mode 40
FUNC LNCV
Adress 21
Function 31
Mode 41
FUNC LNCV
Adress 22
Function 32
Mode 42
Waiting times:
LNCV
Adress
Waiting time
124
Note
Module address
Block operation (block system)
Direction S1 > S2
Waiting time for all locos, after block signal 211 turned green
Signal of target block: check for red or green
Set signal in start block to red
Set signal in previous block to green
Value Note
76 Loco address
3 f0 + f1 light+sound
12 switch on at departure, at pos. 0
Value Note
76 Loco address
256 f8 loudspeaker message
16398 change to another condition at departure, at pos. 2
Value Note
76 Loco address
32 f5 whistle blow of the conductor
24588 change to another condition at departure, at pos. 3
Value
110 76
120 15
and so on ...
Note
Loco with address 76
15 s additional waiting time after block signal turned
green