Perform the procedure accordingly on the contralateral site by using the
left hand for guidance and the right hand for pushing. The sutures are left
hanging out of the introitus until needed.
NOTE: Rectal examination may be required in case of suspected
bowel perforation.
NOTE: Ensure that the TAS are firmly attached to sacrospinous
ligament by gently pulling on the TAS suture.
Positioning of the mesh to the anterior supravaginal portion of the cervix.
Fixation of the mesh with three non-absorbable sutures. Then, the TAS
suture ends are led through the pores of the corresponding mesh arms. For
this purpose, select the outer distal part of the mesh arm in order to ensure a
tension free implantation of the mesh. Since the sutures are already attached
to the sacrospinous ligament by the anchors, ensure that the suture ends are
guided from the posterior to the anterior aspect of the mesh arm.
NOTE: Ensure that the mesh (arm) is not twisted.
NOTE: Ensure a tension-free implantation technique.
Slide the mesh arm to the sacrospinous ligament bilaterally. Hold on to the
end of the TAS suture during this procedure. Subsequently, knot the mesh
arms to the sacrospinous ligament with the corresponding sutures on both
sides respectively. The knot pusher (KP) can be used for this step as and
when required. An anterior colporrhaphy may be performed simultaneously.
Closure of the vagina according to the surgeon's standard procedure. Vaginal
packing for app. 24h is recommended.
SYMBOLS USED IN LABELS
6
CATALOG NUMBER
LOT NUMBER
SERIAL NUMBER
CAUTION
EXPIRY DATE
DO NOT RE-USE
MANUFACTURE DATE
MANUFACTURER
STERILE. STERILIZATION METHOD:
ETHYLENE OXIDE
AUTHORIZED REPRESENTATIVE
IN THE EUROPEAN COMMUNITY
DO NOT RE-STERILIZE
CONSULT INSTRUCTIONS FOR USE
DO NOT USE IF PACKAGE IS DAMAGED
KEEP DRY
KEEP AWAY FROM SUNLIGHT
MEDICAL DEVICE
STERILE BARRIER SYSTEM / STERILE PACKAGING
MAGNETIC RESONANCE SAFE
IMPORTER