The Functions Of The Breadmaker; Alarm Function; Safety Functions - Unold Backmeister MULTI 68211 Bedienungsanleitung

aLarM FUNcTION

The alarm sounds:
- whenever the appliance is connected to the mains; this means, that the appliance is ready for operation and can be programmed;
- when pressing one of the activated programme buttons in order to confirm the respective setting;
- during the first kneading process, to warn that seeds, fruit, nuts or other ingredients can now be added. This alarm cannot be suppressed,
e.g. during night time. As soon as the signal sounds, you can open the filling hole in the lid and add the respective ingredients.
- At the end of the baking a beep sounds ten times. By pressing the button START/STOP you can now stop the programme. If this is not
done, the one hour keep warm function period starts.
- At the end of the keep warm period, the appliance beeps often to indicate that the programme is finished and the bread can be taken out
of the appliance. This signal cannot be suppressed.

saFETy FUNcTIONs

1. After the programme start the lid should only be opened during the kneading phases to add ingredients, but never during the rising or baking
phases, as the dough would collapse.
2. If the room temperature is too low in the function mode BROT/BREAD (below -5°C), the display shows the error L:LL and a signal sounds.
3. If the room temperature for a new programme is too high (over 60°C), the display shows H:HH . In this case press the button START/STOP ,
remove the recipient and wait until the appliance has cooled down. Then restart the programme. The automatic temperature control does not
work in the programmes BAKE and JAM .
4. The automatic temperature control works also in the time delay function directly before starting the programme.
5. Please bear in mind that the appliance has no top heating for safety reasons. Therefore the upper bread crust is not as dark as the sides and
the underside. The installation of an additional top heating is not allowed for safety reasons.
6. If the bread recipient is not correctly inserted, the display shows the symbol
7. If the rice recipient is not correctly inserted, the display shows the symbol
36

THE FUNcTIONs OF THE BrEadMaKEr

and a signal sounds.
and a signal sounds.