Adjusting The Gyro Sensitivity - Reely Deathwatcher XL Bedienungsanleitung

12.2 Adjusting the gyro sensitivity

With the gyro switched on, use the "GYRO LV / ST-D/R" knob (fig. 1, no. 11) to choose one of the
8 sensitivity levels. The transmitter LEDs indicate the setting.
You can thus enhance or reduce the counter-steering of the steering servo as you wish in case
the vehicle rear swerves.
You can check the gyro function and the counter-steering of the steering servo by turning the vehicle chassis to the
left or right to simulate a swerving vehicle rear. The motor/drive should not necessarily be running while doing this.
With the gyro switched off, you can use the "GYRO LV / ST-D/R" knob (fig. 1, no. 11) to set the dual rate
for the steering function, as described in section 11.7.
61