Technical Data; Vehicle; Transmitter - Reely Deathwatcher XL Bedienungsanleitung

22 Technical data

22.1 Vehicle

Scale ............................................................ 1:7
Suitable drive batteries ................................ Two identical 2-cell LiPo drive batteries (nominal voltage 7.4 V)
Battery connections ..................................... XT-90
Recommended discharge rate .................... min. 40C
Motor ........................................................... Brushless electric motor
Chassis ........................................................ Independent suspension
Speed controller .......................................... Continuous current 150 A
Dimensions (L x W x H) ............................... 712 x 246 x 204 mm
Tyre dimensions (W x Ø) ............................. 43 x 107 mm front, 53 x 107 mm rear
Wheelbase ................................................... 409 mm
Ground clearance ........................................ 19 mm
Weight ......................................................... approx. 5010 g (without drive batteries)

22.2 Transmitter

Power supply ............................................... 4 AA/Mignon batteries/rechargeable batteries
Frequency band ........................................... 2.410 - 2.465 GHz
Transmission power..................................... <20 dBm
Range .......................................................... >120 m (open space)
Channels ..................................................... 4
Charging socket ........................................... Outer-Ø 5.5 mm, Inner-Ø 1.5 mm, polarity
or two identical 3-cell LiPo drive batteries (nominal voltage 11.1 V)
All-wheel drive via cardan shaft
Differential in front/rear axle + centre differential
Disc brake on the cardan shaft, can be separately controlled with a
button on the transmitter
Oil-filled shock absorbers with coil springs, adjustable
Adjustable front wheel toe
Adjustable front and rear wheel camber
Short-term current (<1 s) 950 A
Battery type: 4 or 6 cells LiPo (or 8 to 18 cells NiMH)
BEC output 6 V/DC, 5 A
Integrated overtemperature protection + failsafe mode for the drive mo-
tor
charging current max. 250 mA, suitable charger for 4 cells required,
suitable for battery type (e.g. NiMH)
,
83