Adjusting The Shock Absorbers - Reely TQ-Racer Bedienungsanleitung

10. Adjusting the shock absorbers

The shock absorbers be set to different positions on the front and rear axle at the damper bridge (A) and at the lower
control arm (B). Due to the different geometry between the chassis and the axles, there is a difference in spring behav-
iour. This has only a very limited effect on the vehicle. We recommend that you do not change the existing assembly
position of the shock absorbers.
If you still want to make a change, make sure that the setting on the left and right wheel of an axle is always
the same.
Front axle
48
Rear axle